Skip to content
Refrigerated 1–3 Day Express ShippingFree Shipping on Every OrderFind Your Protocol — Take the 2-min Quiz
The Aevum Standard

Every cartridge meets the same standard.

Most of what you buy in this space asks you to take purity, identity, and handling on faith. We publish the numbers instead. This is the specification behind every Aevum cartridge. Filled, tested, and shipped to it, lot after lot.

Eight commitments, quantified

The specification.

ISO 7
cleanroom
01

Filled under cGMP

Every cartridge is filled under current Good Manufacturing Practice in an ISO 7 cleanroom, the particulate class used for sterile injectable production, not a benchtop or a home lab.

>98%
HPLC purity
02

We don't release below spec

Every lot is independently tested by HPLC for purity. The minimum release specification is 98%. A lot that misses it is not released. No exceptions, no quiet downgrades.

MS
identity, every lot
03

Confirmed by mass spec

Mass spectrometry confirms the peptide sequence matches specification on every lot, so what the label says is what the molecule is.

<0.5
EU/mg endotoxin
04

Screened for endotoxin

Each lot is screened for bacterial endotoxin by LAL or recombinant Factor C assay, held below 0.5 EU/mg before release.

1:1
lot traceability
05

Traceable to the crimp

A unique lot identifier on the cartridge crimp maps to its release record. The number on the cartridge in your hand matches the assay record in our system.

2–8 °C
cold chain in transit
06

Held cold, end to end

Orders leave refrigerated in insulated packaging with phase-change cold packs engineered to hold 2–8 °C for the full 1–3 day express transit, not just to feel cold at the door.

240
metered clicks
07

Calibrated to the click

Concentration is calibrated so every cartridge delivers 240 metered clicks at a fixed amount per click. The measuring is done at filling, not by you with a syringe.

0
proprietary blends
08

Nothing hidden

Full disclosure on every product page: the compound, the milligram load, the specification. No proprietary blends, no undisclosed fillers, nothing to hide behind a trademark.

Held to it means

What the standard rules out.

  • Powder in a vial that you reconstitute and dose by hand
  • Off-specification lots quietly sent out to clear inventory
  • Proprietary blends that hide what, and how much, is inside
  • “Tested” with no lot number, no method, and no record to match
  • Room-temperature shipping for a solution that needs the cold chain

A certificate of analysis for your lot is available on request. The compounds themselves, and the mechanism research behind them, are covered on the science page.

The difference, line by line

Aevum vs. the typical research peptide.

Format
TypicalLyophilized powder you reconstitute yourself
AevumFinished liquid cartridge, ready to dose
Preparation & dosing
TypicalBacteriostatic water, a syringe, and dose math, measured by eye
AevumClicks into the pen: 240 metered clicks, a fixed amount per click
Fill environment
TypicalOften unspecified
AevumcGMP, ISO 7 cleanroom
Purity & identity
Typical“Tested”, with method and lot often unstated
AevumThird-party HPLC + mass spec, every lot, ≥98%
Endotoxin screening
TypicalRarely disclosed
AevumLAL / rFC assay, below 0.5 EU/mg per lot
Traceability & COA
TypicalA batch number, if any
AevumUnique lot ID to a release record; COA on request
Shipping
TypicalFrequently shipped at ambient temperature
AevumRefrigerated 2–8 °C cold chain, insulated
Disclosure
TypicalProprietary blends common
AevumFull disclosure: no blends, no undisclosed fillers

Made to the standard. Ready to dose.

Every cartridge in the catalog is filled, tested, and shipped to it.